Roller bending machine

Hydraulic Roller bending machine

Hydraulic 3 roller plate bending machine is a hydraulic three-roller bending machine and used to pre-bending of end of plate , Rolling round, getting cone style and correct plate round as well as complete other processes at one feeding for all sorts of vessel carbon steel and low alloy steel plate as well as stainless steel under normal temperature without turning back.

The upper roller can move vertically and horizontally. Pre-bending is achieved by means of horizontal movement of upper roller to be in asymmetrical position relative to the lower roller.

Rolling round, it is proceeded with the motor and reducer to drive two lower rollers. As the elevation of lower roller is constant, it is very convenient to feed and operate. Detailed electrical schematic diagram will be provided and electrical wiring shall be made strictly as required by the drawings. Both ends of every connecting wire shall bear clear and intact number with marks of the same wire number with the connecting wire number put up on the wire terminals, which shall be indicated clearly on the electrical wiring schematic diagram.

Hydraulic Roller Bending Machine

All electrical parts of the equipment shall be superior quality products from noted enterprises and electrical protector parts shall be tested carefully before the installation to insure effective operation. Hydraulic units used for the equipment shall be products from chinese famous Company. The equipment shall run stably and control flexibly without blockage, leakage and abnormal noise. The paint surface shall be clean, level and shining brightly with even thick paint film while without flow mark, leakage and other defects.

The tipping frame shall be of hydraulic tipping type and high speed. Hydraulic transmission shall be applied for vertical displacement of upper roller and high mechanical transmission speed shall be applied for horizontal movement.